Hony Engineering Plastics Co.,Ltd.
Hony Engineering Plastics Co.,Ltd.
Heim> Blogg> PC carbonate turning and milling

PC carbonate turning and milling

March 28, 2023


Polycarbonate is a durable material. Although it has high impact resistance, it has low scratch resistance. Therefore, hard coatings are applied to polycarbonate eyeglass lenses and polycarbonate exterior automotive parts. Polycarbonate has properties comparable to polymethyl methacrylate (PMMA, acrylic), but polycarbonate is stronger and holds longer at extreme temperatures. Polycarbonate is highly transparent to visible light and transmits light better than many types of glass.


Polycarbonate has a glass transition temperature of about 147°C (297°F), therefore, it gradually softens above that point and flows above about 155°C (311°F). Tools must be kept at elevated temperatures, typically above 80°C (176°F), to produce a strain-free and stress-free product. Low molecular weight grades are easier to mold than high molecular weight grades, but as a result they are less strong. The most difficult grades of steel have the highest molecular weight, but are much more difficult to machine.


Unlike most thermoplastics, polycarbonate can withstand large plastic deformations without cracking or cracking. As a result, they can be machined and formed at room temperature using sheet metal techniques such as bend brakes. Even for sharp elbows with small radii, heating may not be required. This makes it valuable in prototyping applications that require transparent or non-conductive parts that cannot be made from sheet metal. PMMA/acrylate, similar in appearance to polycarbonate, is brittle and cannot be bent at room temperature.


The main conversion technology of polycarbonate resin:

Extrusion into tubes, rods and other profiles, including multilayer


Extruded from cylinders (calenders) into sheets (0.5-20mm (0.020-0.787in)) and films (under 1mm (0.039in)), which can be used directly or by thermoforming or secondary processing Other shapes are made by techniques such as bending, drilling or milling. Due to its chemical nature, it is not conducive to laser cutting.


Injection molded into finished product


Polycarbonate may become brittle when exposed to ionizing radiation above 25 kGy (J/kg).

Hafðu samband við okkur

Author:

Ms. Tina

Phone/WhatsApp:

8618680371609

Vinsælar vörur
Fyrirtækjafréttir
Blog News
What Is PEEK Ball ?

November 13, 2024

PVDF Application Areas

November 03, 2024

You may also like
Related Categories

Sendu til þessa birgis

Efni:
Farsími:
Email:
Skilaboð:

Your message must be betwwen 20-8000 characters

Hafðu samband við okkur

Author:

Ms. Tina

Phone/WhatsApp:

8618680371609

Vinsælar vörur
Fyrirtækjafréttir
Blog News
What Is PEEK Ball ?

November 13, 2024

PVDF Application Areas

November 03, 2024

Við munum hafa samband strax

Fylltu út frekari upplýsingar svo það geti haft samband við þig hraðar

Persónuverndaryfirlýsing: Persónuvernd þín er mjög mikilvæg fyrir okkur. Fyrirtækið okkar lofar ekki að birta persónulegar upplýsingar þínar til allra útgjalda með skýrum heimildum þínum.

Senda